侧固刀柄

用途：
根据DIN 1835和DIN 6535 HB标准，夹持圆柱直柄刀具
Use:
For clamping cutters with cylindrical shank and Weldon flat according to
DIN1835-B and DIN 6535-HB.
According to DIN 6359-2 with taper SK50 form ADB DIN 69871.
Form ADB means: central coolant supply and coolant channels on the collar
which can be sealed again.
Delivery: with clamping screw
– Short version with spray nuzzles on request
– Cooling with Cool Jet against extra charge
ADB型SK50锥柄符合DIN69871
ADB型：中心冷却或可密封的法兰冷却
发货时包含夹持螺钉
– 超短的设计只适合AD型
– 冷却喷孔需要额外费用
用途：
用于夹持符合DIN 1880标准的面铣刀和带有径向驱动键的刀具，
也可夹持符合DIN 2079直径超过40mm的刀盘(4个附加螺孔)
Use:
For holding face mill cutters and cutters with radial driving slot DIN 1880 and
exceeding clamping diameter 40 clamping according to DIN 2079 is possible,
too (4 additional tapping holes).
According to DIN 6357 with taper SK40 form ADB DIN 69871.
Form ADB means: central coolant supply and coolant channels on the collar
which can be sealed again.
– Included in delivery: tightening bolt
– Coolant bores against extra charge
ADB型SK锥柄符合DIN 69871
ADB型：中心冷却或可密封的法兰冷却
– 交货时含：拉紧螺钉
– 冷却喷孔需额外费用