对中仪

对中仪
内孔和外圆的快速精密对中
装卡于铣床主轴，定位于测量轴线的附近。调整探针，使侧
头接触需测量的内孔表面或外圆表面。
刻度表盘总位于观察范围
探针沿着工件表面低速滑动。其移动由刻度盘上的指针显示。
对中仪主体不随主轴旋转，因此刻度表盘总是在操作者视线内。
对中仪用于准确寻找测量轴线
当主轴与测量轴线不重合的时候指针偏转。调整主轴位置使指
针不再摆动，测量轴线被找到。
更多优势：
– 检测表面相对于主轴的平面度
– 补偿主轴和刀柄的同心误差>>不必调整
– 超大表盘避免了刻度间读数的不精确
– 可换探针
技术详情/Technical details
对中仪带有直探针，Φ5mm􀋈夹持杆Φ16mm
Centro with straight probe tip,Φ5mm,clamping shank Φ16mm
附件/Accessories
对中精度/Centering accuracy 0.003 mm
*大转速/Max. rotation speed 150 1/min
内径测量范围/Measuring range interior diameter (drill hole) Ø3-Ø125 mm
外径测量范围（使用弯探针）
Measuring range exterior diameter (shaft, with probe tip bent) Ø0-Ø125 mm
订货号/Order No. 80.300.00
建议使用的HAIMER刀柄
Recommended Haimer Tool Holders
用于对中仪
for Centro
订货号
Order No.
BT 40
BT 50
SK 40
SK 50
HSK-A 40
HSK-E 40
HSK-A 50
HSK-E 50
HSK-A 63
HSK-A 100
40.500.16
50.500.16
40.300.16
50.300.16
A40.000.16
E40.000.16
A50.000.16
E50.000.16
A63.000.16
A10.000.16
Φ 5 mm 球头直探针/Probe tip straight with diameter of ball 5 mm
订货号/Order No. 80.301.00
Φ 5 mm 球头弯探针/Probe tip bent with diameter of ball 5 mm
订货号/Order No. 80.302.00
Φ 2 mm 球头直探针，用于小孔
Probe tip straight with diameter of ball 2 mm, for small bores
订货号/Order No. 80.303.00
对中仪
内孔和外圆的快速精密对中
装卡于铣床主轴，定位于测量轴线的附近。调整探针，使侧
头接触需测量的内孔表面或外圆表面。
刻度表盘总位于观察范围
探针沿着工件表面低速滑动。其移动由刻度盘上的指针显示。
对中仪主体不随主轴旋转，因此刻度表盘总是在操作者视线内。
对中仪用于准确寻找测量轴线
当主轴与测量轴线不重合的时候指针偏转。调整主轴位置使指
针不再摆动，测量轴线被找到。
更多优势：
– 检测表面相对于主轴的平面度
– 补偿主轴和刀柄的同心误差>>不必调整
– 超大表盘避免了刻度间读数的不精确
– 可换探针
Centro
Quick and precise centering of bores and arbors
Clamped into the spindle of the milling machie, the Centro will be positioned close
to the wanted axis. Teh probe tip is adjusted so that the sensing ball touches the
surface of the bore or arbor.
Dial gauge always in sight
The probe tip slides at low spindle speed along the surface of the workpiece.
Its movement is transferred to the pointers of the dial gauge. Teh housing of the
Centro does not rotate with the spindle and thus the dial gauge always stays within
sight of the operator.
Centro finds the axis you wanted. For sure.
The pointers deflect as long as the spindle and the wanted axis do not coincide.
Now the position of the spindle can be corrected until the pointers come to a
standstill. The wanted axis is found.
Further advantages:
– Checking face run of surface to spindle
– Concentricity errors of spindle and chuck will be compensated>> Adjustment not
necessary
–The unusual big sized dial gauge eliminates every single imprecision
– Replaceable probe