大珍大型熔接烟气集尘器 烟气集尘器FB系列

一、用途

ARC熔接, 二氧化碳熔接, 熔断, 特殊熔接等发生烟尘的作业.在烟尘发生源头吸入去除FUME, 保护健康, 提高作业效率
激光加工器, 等离子加工器, 铸铁铸钢加工, 焊接,熔接金属切割加工等发生烟尘的作业.
Fume producing areas for Gauging, Co2 welding, ARC welding.
For processing of laser, plasma, cast gauging, and lead soldering.

二、产品特征

• 中央集中式内置型, 使用起来简单方便.
• 移动时破损或故障率低.
• 通过高精度冲压铸型及电子振动作业, 实现无振动, 低噪音,
• 增加吸收效率, 将空气摩擦阻力降低至*小. •分解, 安装简单, 维护与整修方便
• 附有大型轮及移动把手, 易于移动.
• 通过高级粉刷材料, 使内部构成及高质感至极.
• 由耐热持久性强的素材制成.
• 可以选择活性炭纤维过滤器强力除味功能.
• 将排出口向上引导, 防止车间地面飞散粉尘, 不会造成二次污染.
• Eliminating fume from origin, develop health and productivity.
• Adopting centralized and built in type with concentrated power S/W and differential pressure gauge makes easy recognition for operating and protect damage, decrease trouble on moving.
• Possible zero vibration,less noise, more suction rate,minimized air resistance by superb precision press molds and electronic balancing works.
• Easy moving with handles and big casters.
• Activated carbon fiber filter can eliminate odor.
• Inducing discharge gate toward upside, can protect flying dust and 2nd pollution.

三、过滤器

*过滤器(demister)
•Panel Type Filter在熔接时, 过滤与Fume Gas同时流入的火花及粗粒子.
•过滤器的滤材由不锈钢构成, 可以洗涤, 经济性强.
•Panel type Filter can filter fume gas,flame and thick particles which are produced
during welding.
•Filter is made with stainless steel then economic and washable.

第二过滤器(HEPA filter)
•净化室内空气, 使之再循环, 能源节减效果大, 0.3μm以上尘埃集尘率达99.997%.
•Available cost saving with indoor air purification and re-circulation.
•Using HEPA filter can collect above than 0.3 micron and 99.997%.

第三ACF Filter
•有除味功能
•活性炭纤维过滤器为由多结晶构造高分子化合物构成的活性体, 吸着率高,
不容易风化, 不会造成二次污染等, 耐酸性, 耐碱性强, 寿命持久.
•Available eliminating odor.
•Activated carbon fiber filter is activator that consists of high molecular compound.
It has high absorption ratio and strength and does not make second pollution because
of not easy weathering.It is highly acid-resistant and alkalis-tolerant,and last long.